[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Slide choke question



Well I have a I form 4 inch wide, 8 inch tall, and 8 inch deep.  I wanna use power levels around 220v 30~50amps.  Suitable?
Garry Neeley

-----Original Message-----
From: bunnykiller <bunnikillr@xxxxxxx>
Sent: Tuesday, July 22, 2008 1:25 PM
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: [TCML] Slide choke question

Hey Garry...

If you wind the wire on a form that is approximately the same shape as 
the I section ( rectangular form for a rectagular I core), I see no 
problem with it not working.

Scot D
 

garry neeley wrote:

>If you were to wind the usual coil for a slide choke, how would it work if
>you used an I section of a large transformer for the core?  Or would it work
>at all?  Thanks in advance.
>Bamacoiler
>_______________________________________________
>Tesla mailing list
>Tesla@xxxxxxxxxxxxxx
>http://www.pupman.com/mailman/listinfo/tesla
>
>  
>

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx


[The entire original message is not included]
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla