[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Single MOT SISG



Terry,

That is one crazy-cool looking coil!

Woo


> [Original Message]
> From: piranha <piranha@xxxxxxxxxx>
> To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
> Date: 7/5/2008 12:12:14 PM
> Subject: Re: [TCML] Single MOT SISG
>
> See this:
>
> http://drsstc.com/~piranha/p-2/p-2-index.html
>
> http://hot-streamer.com/temp2/PIRANHA-II.zip
>
> Terry
>
>
>
> bartb wrote:
> > Hi Scott,
> >
> > Exactly what Terry Fritz did when he conceived the SISG. Here's a 
> > photo of his Piranha Coil MOT and 2 board setup. I think this was his 
> > second SISG and he's using the pcb which Mark Dunn put together.
> >
> > http://www.classictesla.com/temp/PIRANHA-Const-006.JPG
> >
> > Take care,
> > Bart
> >
> >
> > Scott Bogard wrote:
> >> Hey guys,
> >>      Could one design a SISG coil to run off of a single MOT, if so 
> >> how many boards would one need.  Thanks.
> >>
> >> Scott Bogard.
> >>
> >>   
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> >
> >
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla