Re: [TCML] Winding the primary

[bartb <bartb@xxxxxxxxxxxxxxxx>]

Yes, that explains that. There's also the technique of snap-in standoffs.
http://www.classictesla.com/temp/Pristand.gif

It just a matter of drilling the holes. Slicing off the top. Then using 
a band saw to cut a slot down the acrylic to give the standoff some give 
when you snap in the tubing.

Take care,
Bart

Mddeming@xxxxxxx wrote:
> Hi Steve,
>  
> I know several people who have tried the closed method. I know of no  one who 
> has tried to do it twice.
>  
> Matt D.
>  
>  
> In a message dated 7/9/2008 8:08:13 A.M. Eastern Daylight Time,  
> shobley@xxxxxxxxxx writes:
>
> Thanks,  these are closed standoffs - that is they have holes drilled through 
> them and  so are not open along the top edge. It is 0.25" copper tubing.
>
> I'll  have another go starting from the middle.
>
> Steve
>
>   
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla