[TCML] WG: JavaTC Calc. Programm Terminology-Trying toLearn...

["Fritz W. Egli" <fritz@xxxxxxxxxxxxxx>]

Von: Fritz W. Egli [mailto:fritz@xxxxxxxxxxxxxx] 
Gesendet: Mittwoch, 2. Juli 2008 09:43
Betreff: JavaTC Calc. Programm  Terminology-Trying to Learn...
 
Dear Bart (Bart Anderson -?),  Dear All,
Thank you for your reply.
 
Please check, if I really ?got it? 100% right:
 
 
PERCENT CP CHARGED:
only dependent on:
 
HV trafo input voltage (possible variac boost ..)
HV trafo sec. voltage (trafo ratio)
HV trafo sec. peak volt. (above x 1,4142)
All above results in  CHARGING VOLTAGE
 
and
 
BREAKEDOWN VOLTAGE 
( JavaTC term: Arc voltage - MG space and electrode geometry dependent)
 
Result, calculated:   
 
PERCENT CP CHARGED = BREAKDOWN VOLTAGE / CHARGING VOLTAGE  
As higher the result, as better performance of TC system (more cap energie)
-?
And as trade off more stress to the caps (their voltage security margin) ?
Good compromise-result range for sound design -?  ( 50 ? 75%?   65 ? 90%?
?? )
 
Time factor (Time between breaks, or BPS)  what is influence to all above ?
 
 
Sorry, as I am stubborn. I always have to be 100% sure, clear ..
Next issues later, if you highly estimated experts permit.
 
Mit freundlichen Grüssen,
Fritz W. Egli
 
 
 
 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla