[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Paralleling NSTs

This is what I thought.  Though it did work with two smaller [disposable]
transformers I have, but I don't think I'll try it with my larger
transformers.

On Tue, Jul 1, 2008 at 3:07 PM, Frank <fxrays@xxxxxxxxxx> wrote:

> You have to have transformers of the same voltage to connect them in
> parallel.
>  The 15K would try and drive 12K as there is a difference of 3000 volts.
> Assuming you could even get the breaker to hold, you would burn something
> up in short order.
> Frank
>
> At 01:29 PM 7/1/2008 -0500, you wrote:
>
>  Say I wanted to pair a 12/60 and 2 15/30s.  If I set the gap for the 12/60
>> would paralleling them be okay?
>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla