Re: [TCML] Transformer

[nancylavoie@xxxxxxxxxxx]

Should be able to run it through a voltage doubler like we use with doubled up microwave oven transformers.Would  probably need to use diodes with a higher current rating though.Not sure but I think someone has managed to run this kind of power through a static gap but why bother?A rotary gap is pretty easy to build  easy if you go the propeller gap route. Wyatt

-------------- Original message -------------- 
From: "Rich Schmuke" <rdj@xxxxxxxxxxxx> 

> I had a question but it got lost in the spark gap thread so I am asking 
> again. I read a note about some one who had a coil with a low voltage 
> transformer. I have a 240V input, 3800V output @ 1amp CCS transformer. No 
> center tap. Would this have any SGTC use? 
> 
> 
> 
> Rich , from the middle of Missouri 
> 
> _______________________________________________ 
> Tesla mailing list 
> Tesla@xxxxxxxxxxxxxx 
> http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla