RE: [TCML] Spark gap

[david baehr <dfb25@xxxxxxxxxxx>]

anyone here in Northen CO have one of these single air blast gaps we could try on my coil ??
 
  not sure if my copper pipe gap is as good, (what kind of spark increase can one expect ? )
 
      mine is pretty stable,... from a cold start,...i could go make a sandwich , come back, and performance wouldnt have changed much
 
        my mounting is a bit diff from others also,....i can just pick up a pipe, clean it/ rotate it , lay it back down , and its ready to go again,....but id like to try one ....
 
 
> Date: Fri, 22 Feb 2008 17:24:13 -0500> From: hallam@xxxxxxx> To: tesla@xxxxxxxxxx> Subject: Re: [TCML] Spark gap> CC: > > Hi Scott,> I absolutely don't have any data supporting that claim. It's really just> "received wisdom" :)> > One of the problems with the classic RQ gap is that unless it's baffled> correctly, most of the airflow goes through the copper pipes and through the> large central gap, with relatively little going through the tight space > between> the pipes. This is just fine for cooling but not so great for air-blast style> quenching. Though of course, cooling does help with quenching.> > Henry> > Quoting huil888 <huil888@xxxxxxxxxxxx>:> > > Henry -> >
_________________________________________________________________
Climb to the top of the charts! Play the word scramble challenge with star power.
http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_jan_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla