[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Polishing Metal (ie Brass) after machining . . .
i use 400 wet/ dry sandpaper and sand the entire surface of the shape to
be polished. It is slow and a lot of work. You will find the paper goes
"soft" after a bit and will not cut as fast. Makes it like using a finer
paper in the final stages."
Sanding wet of course!
Ed
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla