[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Sphere Topload Coil



Gary Weaver had like a 3 foot aluminum ball that I think was on ocean buoy. It was heavy and hard to break out. There were a lot of nice pictures of it but the links no longer work.

Terry


bartb wrote:
Hi Everyone,

Sometime back (quite a while I guess), I remember photo's of a pretty good sized coil with a large sphere top terminal (I'm thinking about 20" diameter). For some reason, Gary Lau comes to mind but I'm not sure. I'm curious of big sphere's and the system that drove them. I'm looking at breakout voltage as based on surface field strength and it would be nice to know a little something on the basic specs of those coils.

So if anyone meeting those specs isn't too busy with life, please post some specs. I don't need the whole gap scene or anything of that nature. Just the basic secondary, top load, cap, and power supply data. Also, was a breakout point required or not would be nice to know.

Reason: I'm advising someone regarding a rather large coil with a very large sphere. From my calculations, the sphere I think is too big for breakout on it's own. Calc's are one thing and those of you well experienced with sphere's may help fill the gap of uncertainty.

Thanks,
Bart
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla