RE: [TCML] Sphere Topload Coil

[david baehr <dfb25@xxxxxxxxxxx>]

I'll have to read up on this, or do you have any plans for this gap ?  Thanks :-)
 
 
> Date: Tue, 19 Feb 2008 10:08:13 -0700> Subject: RE: [TCML] Sphere Topload Coil> From: resonance@xxxxxxxxxxxx> To: tesla@xxxxxxxxxx> CC: > > > > > This is a good coil design. Switching to a hyperbaric type spark gap will> improve your performance. Hyperbarics work great at higher power levels,> ie, 2-4.5 kVA.> > Dr. Resonance> > > > >> > Hi, just your basic Ol' coil : 4" dia sec wound to 24" , #26 wire> >> > Pri.- .25" copper tube /flat spiral> > ...1.25" spacing from the sec.,> > .25" spacing bettween turns (12> > total ),> > tapped at the 11th turn> >> > homemade poly oil caps (TCBOR> > ) APPROX .028mfd (this is a> > guesstament , I dont have a> > cap meter> > right now.> >
_________________________________________________________________
Helping your favorite cause is as easy as instant messaging. You IM, we give.
http://im.live.com/Messenger/IM/Home/?source=text_hotmail_join_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla