[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Table Saw Blades for Phenolic LE



Dan: The only things I/we had luck with cutting phenolic when I ran the  
experimental machine shop at GenRad was carbide tipped tools or for the bandsaw,  
abrasive coated blades. This crap will tear up most types of steel tools.  
Carbide will last for a bit. Wear a mask when machining this stuff. Hope this  
helps.
 
Tom Vales



**************Biggest Grammy Award surprises of all time on AOL Music.     
(http://music.aol.com/grammys/pictures/never-won-a-grammy?NCID=aolcmp003000000025
48)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla