Re: [TCML] Re: IGBT CM600 max current ?

["Chris Swinson" <list@xxxxxxxxxxxxxxxxxxxxxxxxx>]

Finn,

Do you have a actual circuit of this ? are you running the IGBT at the BPS 
figure ?

Chris



----- Original Message ----- 
From: "finn hammer" <f-h@xxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Thursday, December 11, 2008 9:02 PM
Subject: Re: [TCML] Re: IGBT CM600 max current ?


> Gary,
>
> It is going to be lower by an order of magnitude. Power transfer in a
> Tesla coil requires both ringdown and cap recharge.  :-)
>
> Cheers, Finn Hammer
>
> Gary Peterson skrev:
> > So assuming an adequate DC power supply and 50 kHz as the resonant 
> > frequency
> > of your Tesla coil's secondary (with a slightly larger topload attached),
> > then a break rate of 50,000BPS will be no problem as long as the RMS 
> > current
> > does not exceed the transistor's RMS current rating, correct?  G.P.
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.9.16/1843 - Release Date: 11/12/2008 
08:36

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla