[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[TCML] Pole pig ballast
Hey all,
I finally purchased a Pole pig, and I am investigating my
ballasting options. Currently I am running a 6-in secondary, and a sync
gap with an 80nf cap. Knowing this I planned on only allowing about 15
amps of current, until I upgrade all of these other components (I chose
15, because it will be roughly double the wattage I am using now (twice
the voltage, same current,) and put my cap into the LTR size range for
my system, which I assume to be ideal efficiency wise until I get a
non-sync gap.) I have a ton of MOTs (the old power supply) and was
wondering if I could use a series parallel arrangement to get down to 15
amps, and still handle the wattage. I've also investigated welders but
nobody I know has one they would be willing to lend me (gee, I wonder
why?) Anyhow, I know this subject has been discussed to death, but I
just wanted some fresh input (given the potential lethality I'm dealing
with here.) Thanks.
Scott Bogard.
_________________________________________________________________
Talk to your Yahoo! Friends via Windows Live Messenger. Find out how.
http://www.windowslive.com/explore/messenger?ocid=TXT_TAGLM_WL_messenger_yahoo_082008_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla