[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Looking for feedback
It sounds to me like the gaps are too wide, which is why it is probably
splutters... close down the gaps and try again see if that improves your
luck..
chris
----- Original Message -----
From: "Stephen J. Hobley" <shobley@xxxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Friday, August 15, 2008 7:53 PM
Subject: [TCML] Looking for feedback
We recently replaced a static spark gap in our coil with a synchronous
rotary running at 120bps (30rpm * 4 bangs per turn). You can see a movie of
the before and after here:
http://www.youtube.com/watch?v=iylUg_eGk6I
<http://www.youtube.com/watch?v=iylUg_eGk6I>
At the moment the rotary is not delivering the performance we expected. I
believe this is due to a sync problem with the 60Hz supply.
Based on the movie I'd be interested to get constructive feedback from more
experienced coilers...
Thanks,
Steve
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.6.3/1612 - Release Date: 14/08/2008
18:03
--------------------------------------------------------------------------------
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla