[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] Line Filter Rating
Scot,
So do you think that it would suffice to shove 3-4 feet of stripped HV
copper wire into the ground and use that for my ground connection? After
stripping the wire, it will probably be about 1/4" diameter. I also have
about 3' of some some spare 1/4" copper tubing from my primary. Would that
be better?
John Matok
On Thu, Jul 31, 2008 at 9:42 PM, bunnykiller <bunnikillr@xxxxxxx> wrote:
> Hey John...
>
>
> 2. ( affordable) drive 1 8' copper clad steel rod into the ground and
> connect with 12 ga. wire
> 3. ( cheaper) drive 2' of steel pipe with 12 ga. wire attached
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla