[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Desighning and Tuning a DRSSTC Primary



d_bellon@xxxxxxxx wrote:
We have a 4 x 22 inch secondary and are trying to design the primary.  Then tune it.  We are a planning on a vertical primary using 1/4" copper tubing. With a 8-9" diameter. Our secondary is has a freq.330Khtz Are we in the looking good? Any help would be helpful.

we are building a DRSSTC
Try a design like this:
http://www.coe.ufrj.br/~acmq/tesla/drsstc.html
This design results in minimum primary current and maximum efficiency. The last example uses a secondary coil that is quite close to what you have.

Antonio Carlos M. de Queiroz

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla