[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] poor coil performance again- help!



 
Hi Thomas,
 
    The part that sees the heavy current is the loop  from gap to cap to 
primary coil back to gap. The rest can does not need to be  heavy as long as the 
insulation is >:0
 
Matt D.

>  -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx  [mailto:tesla-bounces@xxxxxxxxxx] On
> Behalf Of Ryckmans,  Thomas
> Sent: Monday, April 21, 2008 7:30 AM
> To: Tesla Coil  Mailing List
> Subject: RE: [TCML] poor coil performance again-  help!
>
> Thanks... What kind of cable can you use for the primary  connections? 
Would a
> copper braid (normally used for earthing) be  okay?
>
> Cheers
>
> Thomas


 



**************Need a new ride? Check out the largest site for U.S. used car 
listings at AOL Autos.      
(http://autos.aol.com/used?NCID=aolcmp00300000002851)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla