RE: [TCML] SMPS as voltage source for a tesla coil

["Ryckmans, Thomas" <Thomas.Ryckmans@xxxxxxxxxx>]

Mmh I did read the Wikipedia entry beforehand, but I am still
wondering... I have a few solid-state NSTs, 15kV, that I used to power a
Jacob's ladder.

My question is, basically, "can one power a TC with a high voltage DC
source"?

Many thanks

Thomas

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On
Behalf Of Mddeming@xxxxxxx
Sent: 16 April 2008 16:59
To: tesla@xxxxxxxxxx
Subject: Re: [TCML] SMPS as voltage source for a tesla coil


 
In a message dated 4/16/08 11:27:32 A.M. Eastern Daylight Time,  
Thomas.Ryckmans@xxxxxxxxxx writes:

Hello,

I am sure this has been debated to death... but I can't  find it. Can
one
use a SMPS to drive a Tesla coil? I understand that SMPS  are high
frequency (>20 kHz) but what about rectifying this input? The  tank cap
would get charged to breakpoint, the spark gap will fire...etc. I  think
Greg is using this with a MOT setup (this give a 60 Hz pulse,  while
rectifying a SMPS would give a 20 kHz pulse).

I am asking this  because I find it difficult to source cheap NST in UK,
while SMPS are  easier to find

Cheers

Thomas


Hi Thomas,
 
This may offer some useful background 





_http://en.wikipedia.org/wiki/Switched-mode_power_supply_ 
(http://en.wikipedia.org/wiki/Switched-mode_power_supply) 
 
Matt D



**************It's Tax Time! Get tips, forms and advice on AOL Money & 
Finance.      (http://money.aol.com/tax?NCID=aolcmp00300000002850)
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla