Re: Winding Lathe Construction (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Tue, 18 Sep 2007 13:54:32 -0700 (PDT)
From: Yurtle Turtle <yurtle_t@xxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Winding Lathe Construction (fwd)

Can't get much cheaper than this:

http://www.hot-streamer.com/adam/bigass_coil/coil01.jpg
http://www.hot-streamer.com/adam/bigass_coil/coil02.jpg
http://www.hot-streamer.com/adam/bigass_coil/coil03.jpg
http://www.hot-streamer.com/adam/bigass_coil/coil04.jpg
http://www.hot-streamer.com/adam/bigass_coil/coil05.jpg
http://www.hot-streamer.com/adam/bigass_coil/coil06.jpg

Built almost entirely out of material I had on hand. I
used wife power to wind it, then used the drill motor
and speed controller to coat it.

Adam

--- Tesla list <tesla@xxxxxxxxxx> wrote:

> 
> ---------- Forwarded message ----------
> Date: Tue, 18 Sep 2007 01:50:32 -0500
> From: Crispy <crispy@xxxxxxxxxxx>
> To: tesla@xxxxxxxxxx
> Subject: Winding Lathe Construction
> 
> Hello,
> Does anyone have any good plans for building a
> simple, cheap lathe to
> wind a coil on a 6" PVC sewer pipe form?  I need to
> be able to buy
> everything online, including the motor.
> 
> Thanks,
> Chris
> 
> 
> 
> 
> 



      ____________________________________________________________________________________
Check out the hottest 2008 models today at Yahoo! Autos.
http://autos.yahoo.com/new_cars.html