[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: V11.1 for JAVATC (fwd)
---------- Forwarded message ----------
Date: Wed, 05 Sep 2007 18:03:26 -0700
From: Barton B. Anderson <bartb@xxxxxxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: V11.1 for JAVATC (fwd)
Good for you Bob! You shouldn't sell out. In the case of my program,
there was never any deceit on the person who modified the program as he
was simply trying to get rid of some web stuff within the html for pc
download. I simply wanted to get him to rename it. At first, my concerns
were misinterpreted (as if I cared that someone would modify it), but
after enough discussions, he understood my concern was simply the naming
protocol. It did make clear to me that coilers wanted to run the program
off their pc's, so that's when I decided to make it available as a
download. Lot's of good came out of it.
But I agree, if someone is doing something deceitful, then definitely
expose them and make others aware as you have done here. Their roaches!
When exposed to light they will run away and hide.
Funny, 4 or 5 years ago, we didn't have Tesla's US Patents available and
there were a few web sites selling the patents even though they were
free to view at the patent office. That's when I extracted each and
every page from the patent office and made them available in pdf format.
They are available at my web site and I gave Terry F. a copy of the
whole thing to throw up on his web site. So if anyone is looking for
those patents, you know where to go (and their free).
Take care,
Bart
Tesla list wrote:
>---------- Forwarded message ----------
>Date: Tue, 4 Sep 2007 21:40:21 -0700
>From: Bob Wedeen <bob.wedeen@xxxxxxxxxxxxxxxxxxxxxxxx>
>To: Tesla list <tesla@xxxxxxxxxx>
>Subject: Re: V11.1 for JAVATC (fwd)
>
>Just a brief notification to all the coilers on this site. On ebay, there is
>a seller that uses the name monolithic_media that sells plans for Tesla
>coils. Don't be taken. These plans can be obtained for free on other
>websites. I left a neutral rating for this seller and stated the fact that
>these plans are shared by members of the Tesla coil community. In return,
>the seller left negative feedback for me even though they recieved prompt
>payment. They claimed that the negative feedback was a mistake but only
>offered to retract it and also refund my money if I retracted my statement.
>I will not retract a factual statement that has been made for the welfare of
>other coilers and the ebay community. This seller wants me to sell out at
>the expense of others and it isn't going to happen. The plans aren't that
>expensive but its the principle. They do not want to be exposed. Please
>notify the Tesla coil community and other potential coilers.
>
>Thank you.
>
>Bob
>----- Original Message -----
>From: "Tesla list" <tesla@xxxxxxxxxx>
>To: <tesla@xxxxxxxxxx>
>Sent: Tuesday, September 04, 2007 2:09 PM
>Subject: Re: V11.1 for JAVATC (fwd)
>
>
>
>
>>---------- Forwarded message ----------
>>Date: Tue, 4 Sep 2007 12:39:49 -0400
>>From: Slurp812 <slurp812@xxxxxxxxx>
>>To: Tesla list <tesla@xxxxxxxxxx>
>>Subject: Re: V11.1 for JAVATC (fwd)
>>
>>THANKS! I didn't want to mess with it unless I had permission :) I
>>understand the work involved. I work in IT!
>>
>>
>>On 8/31/07, Tesla list <tesla@xxxxxxxxxx> wrote:
>>
>>
>>>---------- Forwarded message ----------
>>>Date: Thu, 30 Aug 2007 21:44:07 -0700
>>>From: Barton B. Anderson <bartb@xxxxxxxxxxxxxxxx>
>>>To: Tesla list <tesla@xxxxxxxxxx>
>>>Subject: Re: V11.1 for JAVATC (fwd)
>>>
>>>Yes, if you want to load your own "demo coil" data, you need to look
>>>inside the "script" folder and locate the file called JTC_inputs.js.
>>>Open this file in something like Notepad or script editor. Near the
>>>bottom portion of the file you'll see the following data I'll show
>>>below. Just replace the value z = value with "your" value for that input
>>>and save the file. Just be sure you don't change anything else.
>>>
>>>You might want to rename the original JTC_inputs.js as a different name
>>>to maintain the original file if something goes wrong. Just make sure
>>>the file you modify is named JTC_inputs.js. If you save it using Notepad
>>>and Notepad adds a .txt extension to the end, remove the .txt part of
>>>the name.
>>>
>>>Take care,
>>>Bart
>>>
>>>////////////////////////////////////////////////////////////////////////////
>>>// Load Demo Coil values into form field inputs
>>>////////////////////////////////////////////////////////////////////////////
>>>function loadDemo(form) {
>>> demomsg = ('Click RUN JAVATC to run demo coil.');
>>> Clear(form);
>>> form.msg.value = demomsg;
>>> form.units.selectedIndex=0; inches==true;
>>> form.ambient.selectedIndex=0; fahrenheit==true;
>>> GetUnits(form);
>>> form.s_ws.checked = false;
>>> form.s_awg.checked = true;
>>> form.p_ws.checked = true;
>>> form.p_awg.checked = false;
>>> //form.GapStyle.selectedIndex=3;
>>> z = 68; {eval(z); temp = z; form.temp.value = temp;}// ambient
>>>temperature
>>> z = 100; {eval(z); g_radius = z; form.g_radius.value = g_radius;} //
>>>gndr
>>> z = 100; {eval(z); w_radius = z; form.w_radius.value = w_radius;} //
>>>war
>>> z = 150; {eval(z); r_height = z; form.r_height.value = r_height;} //
>>>roh
>>> z = 2.26925; {eval(z); s_radius1 = z; form.s_radius1.value =
>>>s_radius1;} //sr1
>>> z = 2.26925; {eval(z); s_radius2 = z; form.s_radius2.value =
>>>s_radius2;} //sr2
>>> z = 23; {eval(z); s_height1 = z; form.s_height1.value = s_height1;}
>>>//sh1
>>> z = 44.8085; {eval(z); s_height2 = z; form.s_height2.value =
>>>s_height2;} //sh2
>>> z = 895; {eval(z); s_turn = z; form.s_turn.value = s_turn;} //st
>>> z = 24; {eval(z); s_wd = z; form.s_wd.value = s_wd;} //swd
>>> z = 3.75; {eval(z); p_radius1 = z; form.p_radius1.value =
>>>p_radius1;} // pr1
>>> z = 7.969; {eval(z); p_radius2 = z; form.p_radius2.value =
>>>p_radius2;} // pr2
>>> z = 23; {eval(z); p_height1 = z; form.p_height1.value = p_height1;}
>>>// ph1
>>> z = 23; {eval(z); p_height2 = z; form.p_height2.value = p_height2;}
>>>// ph2
>>> z = 8.438; {eval(z); p_turn = z; form.p_turn.value = p_turn;} //st
>>> z = .25; {eval(z); p_wd = z; form.p_wd.value = p_wd;} //swd
>>> z = .0188; {eval(z); Cp_uF = z; form.Cp_uF.value = Cp_uF;} //swd
>>> z = 30; {eval(z); Lead_Length = z; form.Lead_Length.value =
>>>Lead_Length;} // lead length
>>> z = .2; {eval(z); Lead_Diameter = z; form.Lead_Diameter.value =
>>>Lead_Diameter;} // lead length
>>> z = 0; {eval(z); desired_k = z; form.desired_k.value = desired_k;}
>>>// desired_k
>>>
>>> z = 21; {eval(z); t_outer = z; form.t_outer.value = t_outer;} // tout
>>> z = 6.25; {eval(z); t_inner = z; form.t_inner.value = t_inner;} //
>>>tin
>>> z = 48.8085; {eval(z); t_height = z; form.t_height.value =
>>>t_height;} // tht
>>> add_toroid();
>>> z = 8.25; {eval(z); d_outer = z; form.d_outer.value = d_outer;} //
>>>dout
>>> z = 0; {eval(z); d_inner = z; form.d_inner.value = d_inner;} // din
>>> z = 48.8085; {eval(z); d_height = z; form.d_height.value =
>>>d_height;} // dht
>>> add_disc();
>>>
>>> z = 120; {eval(z); x_Vin = z; form.x_Vin.value = x_Vin;}
>>> z = 12000; {eval(z); x_Vout = z; form.x_Vout.value = x_Vout;}
>>> z = 60; {eval(z); x_Iout = z; form.x_Iout.value = x_Iout;}
>>> z = 60; {eval(z); x_Hz = z; form.x_Hz.value = x_Hz;}
>>> z = 140; {eval(z); x_Vadjust = z; form.x_Vadjust.value = x_Vadjust;}
>>> z = 0; {eval(z); x_ballast = z; form.x_ballast.value = x_ballast;}
>>> z = .35; {eval(z); x_Rp = z; form.x_Rp.value = x_Rp;}
>>> z = 4520; {eval(z); x_Rs = z; form.x_Rs.value = x_Rs;}
>>>
>>> z = 1; {eval(z); rsg_ELS = z; form.rsg_ELS.value = rsg_ELS;}
>>> z = 4; {eval(z); rsg_ELR = z; form.rsg_ELR.value = rsg_ELR;}
>>> z = 1800; {eval(z); rsg_rpm = z; form.rsg_rpm.value = rsg_rpm;}
>>> z = 10.6; {eval(z); rsg_disc_D = z; form.rsg_disc_D.value =
>>>rsg_disc_D;}
>>> z = 0.375; {eval(z); rsg_ELR_D = z; form.rsg_ELR_D.value =
>>>rsg_ELR_D;}
>>> z = 0.375; {eval(z); rsg_ELS_D = z; form.rsg_ELS_D.value =
>>>rsg_ELS_D;}
>>>
>>> z = 6; {eval(z); stat_EL = z; form.stat_EL.value = stat_EL;}
>>> z = 1.25; {eval(z); stat_EL_D = z; form.stat_EL_D.value = stat_EL_D;}
>>> z = 0.25; {eval(z); stat_gap = z; form.stat_gap.value = stat_gap;}
>>> form.SPE.checked=true;
>>> form.RGE.checked=false;
>>>
>>>Tesla list wrote:
>>>
>>>
>>>
>>>>---------- Forwarded message ----------
>>>>Date: Thu, 30 Aug 2007 23:58:54 -0400
>>>>From: Slurp812 <slurp812@xxxxxxxxx>
>>>>To: Tesla list <tesla@xxxxxxxxxx>
>>>>Subject: Re: V11.1 for JAVATC (fwd)
>>>>
>>>>I was just recently using JavaTC to work out some of the last details.
>>>>before I finish my coil. This is an excellent program! I also work ion
>>>>the IT field, and I am familiar with what we call a dot-0 release!
>>>>With out you and just about everyone else on this list, I wouldn't
>>>>almost have a working coil. I need a few more things, and lots more
>>>>time, but it will make sparks, someday. I only have one question, is
>>>>there anyway to "load" coil data in via a data file of some sort?
>>>>
>>>>
>>>>On 8/27/07, Tesla list <tesla@xxxxxxxxxx> wrote:
>>>>
>>>>
>>>>
>>>>
>>>>>---------- Forwarded message ----------
>>>>>Date: Sun, 26 Aug 2007 12:33:56 -0700
>>>>>From: Barton B. Anderson <bartb@xxxxxxxxxxxxxxxx>
>>>>>To: Tesla list <tesla@xxxxxxxxxx>
>>>>>Subject: V11.1 for JAVATC
>>>>>
>>>>>Hi All,
>>>>>
>>>>>I uploaded version 11.1 to replace V11.
>>>>>
>>>>>(D.C., I'll send another CD).
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>
>
>