RE: First Telsa built - Video - Uk (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Mon, 22 Oct 2007 07:15:48 -0700
From: Anthony R. Mollner <penny831@xxxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: RE: First Telsa built - Video - Uk (fwd)

Congratulations! You have now become an ozone addict. Welcome to the club!
Tony

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Monday, October 22, 2007 5:46 AM
To: tesla@xxxxxxxxxx
Subject: First Telsa built - Video - Uk (fwd)



---------- Forwarded message ----------
Date: Mon, 22 Oct 2007 12:59:38 +0100
From: James Howells <james@xxxxxxxxxxxxxxxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: First Telsa built - Video - Uk


http://www.youtube.com/watch?v=WRYY7EhZB3E
http://www.youtube.com/watch?v=ioG40rby4mc



After 11 months of learning and experimenting I have finally got a TESLA 
COIL working
I realise it's "small beer" and inefficient - at 6Kv and 32mA I should 
get 26" sparks but can only manage 16-18 "
The Secondary coil - 3.5 dia  1200 turns of .0011 inch wire
 has a spigot on the bottom and fits into a receptacle on the base 
board  ( all some form of plumbing /gas C-H boiler fittings)
This means I can easily take the secondary coil off for transporting the 
coil
The spark gap is static and made from copper backed cont actors faced 
with solid silver buttons   - salvaged from a fork lift truck.
The big top load is two dog feed bowls, back to back, a ring of foam, 
pipe insulation covered with s/a Al foil

THANKS TO ALL ON THIS LIST AND TCBOUK  for your help _ ESPECIALLY Terry 
Fritz





James Howells , Staffordshire , England

-- 
Protected by www.SpamJab.com {UgzndUInruKjv2Cy9r}