Re: Lamda Capacitor Charger (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Sat, 13 Oct 2007 18:40:33 -0700 (PDT)
From: Yurtle Turtle <yurtle_t@xxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Lamda Capacitor Charger (fwd)

I have two of these:

http://www.hot-streamer.com/adam/garage/psu_34kV_1.jpg
http://www.hot-streamer.com/adam/garage/psu_34kV_2.jpg

The first one fried, so if you know how to
troubleshoot these, please contact me offlist.

The fellow I bought the first one from was named Chris
Brick. He used several either parallel or series to
run a coil.

Yours are WAY bigger than mine, but I'd think they'd
work for conventional coils.

Adam

--- Tesla list <tesla@xxxxxxxxxx> wrote:

> 
> ---------- Forwarded message ----------
> Date: Sat, 13 Oct 2007 13:04:36 -0700
> From: Jim Mora <jmora@xxxxxxxxxxx>
> To: 'Tesla list' <tesla@xxxxxxxxxx>
> Subject: Lamda Capacitor Charger
> 
> Hello All,
> 
>  
> 
> I was excited to finally get my Ebay sourced
> 8KJ/sec, 50KV Lamda capacitor
> charger working - a valuable find. All that was
> needed to get it working was
> a couple of $.75 gates that the previous owner was
> tweaking with. Happily
> the inverters and HV tank seem to be working
> perfectly. It was a bit weird
> to get my mind around a negative charger, but I did.
> It works via remote
> control HV on switch and a 0-12v potential swings
> the entire 0-50KV. The
> unit is remotely trigerable as well. I am wondering
> if it could be used as a
> Tesla PSU as well as its specific purpose to charge
> the two Big Discharge
> Caps from the Geek Group? It is powered by 3p 208V
> and is a pretty
> intimidating beast. I'll post some pics soon on
> Blogspot.
> 
>  
> 
> Regards,
> 
> Jim Mora
> 
> 
> 
> 



       
____________________________________________________________________________________
Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469