[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Coax Capacitor



----- Original Message ----- 
From: "Ben Sneath" <bsneath@xxxxxxxxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, November 23, 2007 11:01 AM
Subject: [TCML] Coax Capacitor


a rather silly question i suppose...
has anyone tryed coax as a tank capacitor, i think its 10 pF
per foot... it'd be good up untill about 15kv would it not?
as for inductance, its in the 10's of uH range. you could
buy a roll cut it into 1' lengths, solder to a pair of end
plates...

I think you will need a lot of cable to get even to 10nF value. Also coax 
usually has air gaps which will ionise and lower the voltage to maybe just a 
few hundred volts...
For what you may pay on coax you might be better buying some flat sheets of 
plastic to make some flat plate caps instead...
My 2 cents worth.....

Chris






_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla