[TCML] outer primary turns arcing ?

["Chris Swinson" <list@xxxxxxxxxxxxxxxxxxxxxxxxx>]

Hi all,

With my primary coil (about 20 turns) I tap in at about 7 turns, though I 
recall when I first built my super primary when the coil was running the 
very end of the primary arced to the next inner turn. After bending the last 
few inches of the tube out a fraction it solved the problem. Though why 
would the outer turns have so much voltage when only the first few turns of 
the primary were actually connected in circuit ?

cheers,
Chris


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla