Re: [TCML] Primary

["resonance" <resonance@xxxxxxxxxxxx>]

You can also use 6 AWG solid copper ground wire from Home Depot.  It winds 
easily.  12 AWG house wiring will work with reduced current in your pri.

Resonance Research Corp.
www.resonanceresearch.com


----- Original Message ----- 
From: "Clive Hansen" <mrclivehansen@xxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, November 14, 2007 8:51 PM
Subject: [TCML] Primary


> Hello,
>    I am building my first coil and am pretty far along in construction. So 
> far I am using a 15kv 30ma nst to drive the coil. I have build a bottle 
> cap which I calculated to be around 8nf. I have a static gap and am going 
> with a 13 turn primary and a 1100 turn 4 inch diameter secondary with 24 
> gauge wire. My question is this: Can the primary be wound with 14 gauge 
> house wire? I had quite a few difficulties winding one out of copper 
> tubing.
>
> -Clive
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla