Re: white acetyl (delrin) plate pri coil holders (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: List moderator <mod1@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Mon, 28 May 2007 20:12:28 -0500
From: resonance <resonance@xxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: white acetyl (delrin) plate pri coil holders (fwd)



Also, 5.8" OD copper tubing notches.  We usually notch at 60% dia so they 
"snap" into place.

Dr. Resonance
----- Original Message ----- 
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Monday, May 28, 2007 12:32 PM
Subject: white acetyl (delrin) plate pri coil holders (fwd)


> Original poster: List moderator <mod1@xxxxxxxxxx>
>
>
> I'm running some white acetyl plate pri holders for Keith Garvin next
> week.  If anyone needs
> some sets of 8 pcs of pri holders now would be the best time to get them
> done as we can
> quickly setup and make the cuts on several sets at once.  After June 10th
> our next run will
> be during our open house on Sept. 8th.
>
> I can do 1/4", 3/8", and 1/2" size copper tubing (OD).
>
> In July we will be running a bunch of 0.1 uF, 80 kV energy discharge caps
> --- contact me
> off-list for a datasheet if you are interested.
>
>
> Dr. Resonance
>
>
>
>