Re: Terry Filter Tuning

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "resonance" <resonance@xxxxxxxxxxxx>



I talking about the usual range of nsts, approx 1-3 kVA.  With 
typical small dia coilforms, ie, 4-6 inches, usual production is 
around 1 ft/kVA.  With solid state around 1 ft/450 Watts.

Hope that clarifies it.

Dr. Resonance
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, March 23, 2007 8:51 PM
Subject: Re: Terry Filter Tuning


> Original poster: FIFTYGUY@xxxxxxx
> In a message dated 3/22/07 11:16:26 P.M. Eastern Standard Time, 
> tesla@xxxxxxxxxx writes:
>
> >Typical with air gap is around 1 ft per 1 kVA while with
> >solid state SISG design approx 450 Watts per ft of spark for coils
> >with total spark outputs under 4-5 feet.
>
>     That doesn't seem right? Perhaps you mean 1 ft of output arc 
> per 100 W input for spark-gap coils, twice that arc length for SISG coils?
>
> -Phil LaBudde
>
>
>
>
> ----------
> AOL now offers free email to everyone. Find out more about what's 
> free from AOL at <http://www.aol.com?ncid=AOLAOF00020000000339>AOL.com.