RE: WANTED: (1) Maxwell .03 35kv

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>

Dr R,

Please contact me off list if you do - for pricing etc. I lashed up a .03
MMC as the center cap and charged the (2) big 4.1 Geek Aerovoxs in parallel
to 35KV in 29 secs. They can take 50KV but they will never see that here!
That's good enough for now!

The 37677's are convenient as they are the same threads as the door knobs
and make a great base attached to a poly board on the bottom and a top 2"
wide .25" Lexan plate to hold it all together... simple and clean.

Now for some (controlled) wire explosions :-)

Jim Mora

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Monday, March 12, 2007 9:06 PM
To: tesla@xxxxxxxxxx
Subject: Re: WANTED: (1) Maxwell .03 35kv

Original poster: "resonance" <resonance@xxxxxxxxxxxx>



I may have one.  I will check with Matt at the shop tomorrow.

Dr. Resonance


>Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>
>
>Hi,
>
>Does anyone have a Maxwell 37677 that hasn't been over-volted that they
want
>to sell? I need a third one as the base of a fullwave voltage doubler to be
>powered by a 15kv/120 NST pair and variac. The next 2 stages are 4000pf big
>door knobs (this should add some punch to the current output).