RE: usable potential transformers? (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Sun, 1 Jul 2007 21:15:53 -0700
From: Jim Mora <jmora@xxxxxxxxxxx>
To: 'Tesla list' <tesla@xxxxxxxxxx>
Subject: RE: usable potential transformers? (fwd)

Hello Rich,

I have a industrial PT that is 120 or 240 but is 5KVA which is sorta unusual
I believe. Most the ones I have seen on the net are 120v. 208v is likely
from 3 phase wye?

Jim Mora  


-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx] 
Sent: Sunday, July 01, 2007 8:14 PM
To: tesla@xxxxxxxxxx
Subject: RE: usable potential transformers? (fwd)


---------- Forwarded message ----------
Date: Sun, 1 Jul 2007 19:57:06 -0500
From: Rich & DJ <rdj@xxxxxxxxxxxx>
To: 'Tesla list' <tesla@xxxxxxxxxx>
Subject: RE: usable potential transformers? (fwd)

Are you sure it is not 208V input, that is a standard voltage for industrial
transformers. My PT transformer is 208 input.
Rich

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx] 
Sent: Sunday, July 01, 2007 12:16 PM
To: tesla@xxxxxxxxxx
Subject: RE: usable potential transformers? (fwd)


---------- Forwarded message ----------
Date: Sun, 1 Jul 2007 09:37:21 -0700 (PDT)
From: J. Aaron Holmes <jaholmes@xxxxxxxxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: RE: usable potential transformers? (fwd)

Yeah, hard to read.  I think the VA is 1750.  At
least, I can't think of what else that number would
represent...

Aaron, N7OE

--- Tesla list <tesla@xxxxxxxxxx> wrote:

> 
> ---------- Forwarded message ----------
> Date: Sun, 1 Jul 2007 09:03:52 -0700
> From: Jim Mora <jmora@xxxxxxxxxxx>
> To: 'Tesla list' <tesla@xxxxxxxxxx>
> Subject: RE: usable potential transformers? (fwd)
> 
> Hi All,
> 
> Yes, I was looking at (1) of these, though $'s are
> tight now. I have put in
> a request to the seller find out the VA rating since
> the plate is
> unreadable. I am assuming (always dangerous) that
> the Pot xformer is
> removable from the apparent stand. It would be nice
> to go up to this voltage
> but quenching even on a 17" rotor, may become an
> issue??
> 
> Thoughts?
> 
> Long arcs,
> Jim Mora
>  
> 
> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx] 
> Sent: Sunday, July 01, 2007 7:01 AM
> To: tesla@xxxxxxxxxx
> Subject: usable potential transformers? (fwd)
> 
> 
> ---------- Forwarded message ----------
> Date: Sun, 01 Jul 2007 08:41:00 -0400
> From: Dave Goodfellow <dgoodfelo@xxxxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Subject: usable potential transformers?
> 
> On ebay now Item number: 220125509946
> Looks like 25000 to 120, but it is hard to see the
> plate.
> 
> Dave Goodfellow
> 
> 
> 
> 
> 
> 
> 
>