RE: vttc_project_picture

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "S&JY" <youngs@xxxxxxxxx>

Brett,

Recently someone (Hoops?) posted pictures of an 833A setup which used finned
plate & grid caps to help dissipate heat from the tube.  It's a very good
idea - you should consider doing that instead of using the ceramic ones.
You should also use a fan to blow air at the 833A to further help with
cooling.
--Steve Y.

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Friday, January 26, 2007 9:31 PM
To: tesla@xxxxxxxxxx
Subject: vttc_project_picture

Original poster: Brett Miller <brmtesla2@xxxxxxxxx>

tube coilers,

Here's a picture of my upcoming single 833a system
basically in mockup form.  I basically just have to
wait for a few things to arrive and then wire
everything up and attach to my RF ground.  The 20a
variac is ready and I will be using a second variac or
maybe just a dimmer on the filament tranny.

http://www.hot-streamer.com/brett/misc/single_833_vttc_mockup.jpg

-Brett



____________________________________________________________________________
________
Need a quick answer? Get one in minutes from people who know.
Ask your question on www.Answers.yahoo.com




--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.17.12/654 - Release Date: 1/27/2007
5:02 PM