[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Engineering Solution

Original poster: "D.C. Cox" <resonance@xxxxxxxxxxxx>

Unfortunately, this would not tear down and re-set up very rapidly.

Dr. Resonance
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Monday, January 08, 2007 4:02 PM
Subject: Engineering Solution

Original poster: "Jared Dwarshuis" <jdwarshuis@xxxxxxxxx>
Hi: Dr. Resonance

We use sweated fittings for all of our primary connections (and splices). It is actually faster then other methods and completely reliable. Use a wet rag to wipe off excess solder.
Sincerely: Jared Dwarshuis