[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Original poster: "Breneman, Chris" <brenemanc@xxxxxxxxxxxxxx>

Actually, I am running Linux. I might be able to wine it, but I was looking for the mathematical explanation. I'd rather understand the logic behind the program than "plug n' chug".


-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Fri 1/5/2007 8:25 PM
To: tesla@xxxxxxxxxx
Subject: Re:

Original poster: "Drake Schutt" <drake89@xxxxxxxxx>

How do you arrive at the conclusion that .01uF is almost exactly
right for a static spark gap?  Is there some way of mathematically
calculating this or is it purely experimental?  And is this dependent
on voltage or other factors?


Hi Chris,
I know because I am finishing my coil that is based on the same exact
transformer you have.  The transformer is the biggest (only?)
determining factor i can think of as far as design goes.  its
basically where you have to start.  When you know the voltage and
amperage output of the transformer you can determine almost
everything else (sort of), definatly required capacitance.  I
personally recommend wintesla, scratch that teslamap!  you can
download it here
assuming youre running windows of course (im not at the moment, linux
ftw!).  its a lot of help!  it can help you calculate everything you
need to know including your MMC.  i dont know how to calculate it
thats what the program does!  its sort of mathematical, sort of
experimetal.  (Res, LTR, etc.)

got to run,