[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [RE]Primary Coil



Original poster: FutureT@xxxxxxx In a message dated 2/14/07 1:35:47 AM Eastern Standard Time, tesla@xxxxxxxxxx writes:

Heres a few new pictures of the primary. One showing the secondary
and topload placed how they will be when it is finished. Worked the
primary into a little better shape. The topload is 4" aluminum
ducting covered in a aluminum tape. It has a diameter of about 8.5",
which is a little small, but I think should work?


Matt,

Yes it will work.  Almost any design will work as long
as the tuning is OK, the coupling is OK, and the spark gap is
adequate.

John