[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 813 in my vttc...

To: tesla@xxxxxxxxxx
Subject: Re: 813 in my vttc...
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Tue, 13 Feb 2007 17:23:03 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <tcmlmod@xxxxxxxxxxxxx>
Resent-date: Tue, 13 Feb 2007 17:23:00 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <kB38CyTg2t.A.m0H.kZl0FB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Brett Miller <brmtesla2@xxxxxxxxx>


>      You should be careful to maintain full filament
> voltage with
> tubes with that type of filament.  You can damage it
> by running high
> current with reduced filament voltage.  Measure it
> at the socket
> before applying power!
>
> Ed

Ed,

Yes, I always measure it right at the pins..but as I
stated in my initial email, the voltage in this case
is 11v, so it's a volt over.

-Brett



____________________________________________________________________________________
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL

Prev by Date: Re: Duty cycle of OBIT?
Next by Date: Re: Electricial conductive beam
Previous by thread: Re: 813 in my vttc...
Next by thread: Re: 813 in my vttc...
Index(es):
- Date
- Thread