Re: 813 in my vttc...

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Ed Phillips <evp@xxxxxxxxxxx>

Vttc veterans are probably scoffing, but it's a big
lesson for me, and something to keep in mind for
beginners.  Don't wimp out on the wiring for the anode
and cathode on your vttc, it will bottleneck.  I
thought I could jumper just for a test, but if you do
so, the test will be mostly in vain.

-Brett"

    You should be careful to maintain full filament voltage with 
tubes with that type of filament.  You can damage it by running high 
current with reduced filament voltage.  Measure it at the socket 
before applying power!

Ed