[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: First Light



Original poster: "Alex July" <julez06@xxxxxxxxxxxxxx>

The secondary is 4" x 20", and the tubing is 1/4", I have smoothed out
my toroid a bit whilst I wait for some HVAC ducting which looks a lot
smoother than what I had, I had it running at full and suddenly the
sparkgap stopped firing, on further inspection there was a huge
ammount of corroded copper. I've just finished removing it and
hopefully I will be able to power it up soon. However smoothing out
the toroid has helped a lot, less little ones and some nice lingering
sparks. I'm on my outer most tap so it looks like I might have to make
a larger primary. Thanks for the compliments, going to have to add
casters on the bottom though!