RE: [TCML] Table top Magnifier

["Mark W. Stolz" <mark_w_stolz@xxxxxxxxxxx>]

Congratulations on a very nice job David!

Mark Stolz
Pearland, TX
http://teslacoils4christ.org/

> From: DNVanDoren@xxxxxxxxxxx
> 
> Hello Everyone
> I wanted to show everyone my latest Tesla project.
> A table top, plug and play Magnifier.
> I have photos at this link  http://www.flickr.com/photos/21962809@N02/
> I've always wanted a small table top coil that I could plug in anywhere
> and have a lot of fun with. So I built this coil out of parts I had "in stock". 
> I also have been using this as a study coil
> to learn more about theory of opperation. Using LT Spice and Exel spead sheets
> and of corse the Pupman List I have been able to examin it's operation like never before.
> I still have a lot to learn and
> I still have some tweeking to do but this close enough for now.
> 
> Specs are as follows:
> 
> Transformer: Oil burner ignition xformer, 10kv @ 23ma
> Capacitor: 8.9nf mica paper RFcap, 45kv BIL
> Spark Gap: 3 gap quenched gaps, Gap width set to the max!
> Primary Coil: 55uH, 15 turns 1/8 dia cu tube, 8.5" dia .25" pitch
> Secondary Coil: 3.7mH, 200 turns 20awg, 6" dia x 7" long
> Primary/secondary Coeffient of Coupling: .5
> Extra Coil: 24.77 mH, 1083 turns 30awg, 3.5" dia x 13" long
> Top load: Spun aluminum 4" x 12"
> Max spark length: 16-17"
> 
> Thanks everyone hope you enjoy
> 
> David 


_________________________________________________________________
Don't get caught with egg on your face. Play Chicktionary!
http://club.live.com/chicktionary.aspx?icid=chick_wlhmtextlink1_dec_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla