Re: [TCML] Re Chinese capacitors

[Slurp812 <slurp812@xxxxxxxxx>]

I have a iced tea cap now, and my coil is not yet complete. When time comes
to upgrade to a MMC, I will probably try that route just to see if they are
viable at all. Iv been asking around, and got no real answer yet...


On Dec 15, 2007 12:25 PM, Barton B. Anderson <bartb@xxxxxxxxxxxxxxxx> wrote:

> Hi Phillip,
>
> I don't anyone who has used these, so it's an unknown. They would need
> to be tested as Terry did with the 942C series. They also require a
> little field time as well. I would recommend buying a few and testing
> them first before going hog wild on a large quantity.
>
> Take care,
> Bart
>
> Phillip Strauss wrote:
> > Hi,
> > Does anyone have  opinions on the 0.15uF 2000V  axial pulse caps that
> > are advertised on E bay from China.
> > They are described as film foil metal hybrid construction and the
> > specifications of esl, esr,dv/dt and current ratings are identical
> > to the highly regarded CD 942 series, the only difference as far as I
> > can tell is that they are yellow rather than the CD White !
> > From a previous enquiry I know that the seller will give a large
> > discount on a bulk order. I'm considering a large MMC which would
> > require up to 300
> > capacitors but wonder if they would be inferior to the CD's,
> > All suggestions would be gratefully appreciated,
> > Regards,
> > Phillip.
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> >
> >
> >
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla