[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] xfmr oil
Hi marko,
I don't really know anything about refrigeration oil, but I do know that
mineral oil is suitable for high voltage uses. There are oils specifically
designed for high voltage applications but mineral oil is a decent
substitute. The only problem with oils and high voltages is that any water
or other impurities can make it much more conductive. My uncle flies small
aircraft in developing countries and rural areas where sometimes the
gasoline is questionable. He carries what looks like a pack of mentos (a
candy) with a "SHELL" logo on it. He puts them in the gasoline in question
and if there is water in it they turn blue. I don't know where you could
get any of them, but the point is if you want to use unknown oil for TC use
you should see if it has water in it first.
Regards,
Drake Schutt
On Dec 10, 2007 10:27 PM, mark olson <kc5gym@xxxxxxx> wrote:
> I routinely work on medium to large refrigeration plants and as a matter
> of
> procedure procure gallons of refrigeration oil.
> It is usually clean and dry, unless there was a running burn, and it is
> usually mineral oil. It seems to be ideal for Tesla coil
> work.
>
> Am I unaware of something?
>
> Marko
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla