Re: [TCML] Intro and questions / MMC

["resonance" <resonance@xxxxxxxxxxxx>]

The usual reason is that many vendors stock the 0.15 uF value.  The 0.1 is 
not so common.

We are in Wisconsin

Dr. Resonance

Resonance Research Corp.
www.resonanceresearch.com


----- Original Message ----- 
From: "dunnsept" <dunnsept@xxxxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Monday, December 10, 2007 1:35 PM
Subject: Re: [TCML] Intro and questions / MMC


> I live close to Midland, about 80 miles north-east of Lansing.
>
> Here's another question for the group:
>
> In looking at different caps to use for an MMC, it sure seems that the CDE 
> 942C are everybody's favorite,
> but would it be that big of a deal to go to the 940C?  They are 0.1uF 2000 
> vdc instead of 0.15uF
> and are less than half the cost ($1.86 per for quant > 10)
> is there some other rating on these that prefers the 942C20P15K ?
>
> thanks!
>
>
> ----- Original Message ----- 
> From: <Mddeming@xxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Friday, December 07, 2007 5:47 PM
> Subject: Re: [TCML] Intro and questions
>
>
> > Hi Paul,
> >
> >    Welcome! Where in Michigan do you live? You might  have a number of 
> > other
> > coilers very close to you. Other comments interspersed  below:
> >
> > Matt D.
> <snip>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla