RE: 5021g10 transformer (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

---------- Forwarded message ----------
Date: Fri, 17 Aug 2007 15:18:15 -0500
From: Terri Neeley <neeley_111@xxxxxxx>
To: tesla@xxxxxxxxxx
Subject: RE: 5021g10 transformer (fwd)




False alarm.  I was digging around at work earlier today and uncovered 7
of these babies.  They didn't need them all so I took 1.  They also have
the correct caps attached as well.  Now the transformers output the
spec'd voltage and current.  Back to 9kv 225ma.

Garry Neeley

________________________________________________________________________________

      From:  "Tesla list" <tesla@xxxxxxxxxx>
      To:  tesla@xxxxxxxxxx
      Subject:  5021g10 transformer (fwd)
      Date:  Fri, 17 Aug 2007 12:19:06 -0600 (MDT)
      >
      >---------- Forwarded message ----------
      >Date: Fri, 17 Aug 2007 11:40:41 -0500
      >From: Terri Neeley <neeley_111@xxxxxxx>
      >To: tesla@xxxxxxxxxx
      >Subject: 5021g10 transformer
      >
      >Well I got my transformers today 2 of them from c and h.  1
      of them was
      >damaged and I attempted repair and I thought I had it fixed
      until I wired
      >it up.  It just buzzed and only output 800v so I'm down to
      1.  It puts
      >out 6.3kV @ 400mA tested with a variac fluke 179 and a fluke
      80k40.  Is
      >this enough voltage for a tesla coil?  Is it too much
      current?  Any
      >advice would help.  Thx in advance.
      >Garry Neeley
      >
>______________________________________________________________________________
      _
      >
      >More photos, more messages, more storage—get 2GB with
      Windows Live
      >Hotmail.
      >
      >


________________________________________________________________________________

Now you can see trouble…before he arrives