[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: REPRODUCTION OSBORN SPARK GAP (fwd)



---------- Forwarded message ----------
Date: Wed, 08 Aug 2007 23:44:10 +0000
From: Jeff Behary <jeff_behary@xxxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: Re: REPRODUCTION OSBORN SPARK GAP (fwd)

Hi Ed,

I was just using a small OBIT, 23mA 10kV, so there is very little heat in 
the gap.  For 60 or 120mA I'd probably switch to bakelite.  I don't know if 
they sell G10 in tube form... not sure I could afford it in any case.

The originals used glass cups, and blew compressed air through the segments 
to keep them cool.

Once the workshop is back in order I'll try and make one for a 5kV 120mA 
neon transformer.  I have some of the aluminum disks still.  Maybe I'll 
switch to 1/4" diameter tungsten though for the higher currents.

Jeff Behary, c/o
The Turn Of The Century Electrotherapy Museum
http://www.electrotherapymuseum.com

_________________________________________________________________
Now you can see trouble…before he arrives 
http://newlivehotmail.com/?ocid=TXT_TAGHM_migration_HM_viral_protection_0507