[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: streamer output - toroids vs. spheres



Original poster: "earl rhodes" <earl_1975@xxxxxxxxxxxxx>

hi all
this one really interests me as i have a statue of an egyptian lady holding a torch (the torch is a lamp) im going to replace the lamp with a sphere ! the rest is obvious, and i think the swirling spiral type discharge might actually benefit the idea ( she is life size ) but ! i was going to use a pancake coil so to keep it all flat as a new stand for her , would it be difficult to reproduce using a pancake coil with the sphere so far away from the e fields
thnx
earl

From: "Tesla list" <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: Re: streamer output - toroids vs. spheres
Date: Fri, 20 Apr 2007 23:01:43 -0600

Original poster: "huil888" <huil888@xxxxxxxxxxxx>

Miles -

I have a small spark-gap desktop coil (2" X 11" secondary) with a 6" X 3"
toroid. Most of the time this coil generates multiple frantically-darting
streamers from random positions around the toroid. However, ocassionally the
streamers will coalasce into a single vertical streamer, which slowly
rotates like a miniature tornado. The sound of the discharge changes during
this mode of operation, and the single discharge is brighter than the
multiple streamers. This coil is only run indoors, and the lack of any air
currents may help the single discharge to form. This is the only coil I have
ever seen that creates this type of discharge, but it sounds like your coil
generates a similar appearance.

Regards,
Scott Hanson
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Thursday, April 19, 2007 7:57 PM
Subject: streamer output - toroids vs. spheres


Original poster: mileswaldron@xxxxxxxxxxx

It seems that everyone is using toroids as toploads these days. I admit
tuning a coil with a toroid is much easier than tuning a coil with a
sphere; however, there is one remarcable difference in streamer output
that I have noticed. This type of streamer output is so *AMAZING* that I
don't like toroids, and prefer spheres.

What I see happen with a tuned in sphere, with careful and painful
adjustments, is that I can get exactly 1 streamer rolling around the top
of the ball. The streamer will eventually settle itself down on the top of
the ball and start "reaching" upwards. The end of the streamer licks and
curls around in a shape that I cannot describe, going inside itself in
fractal looking loops. It will stand there doing this for quite some time.
It is a beautiful site to see. My 3" diameter coil can project a 42"
streamer upwards using a single 12-60 NST.

This is a simple observation about topload shape that I hope will foster
some interesting commentary.

Miles





_________________________________________________________________
Solve the Conspiracy and win fantastic prizes.
http://www.theconspiracygame.co.uk/