At 09:21 PM 9/26/2006, Raj wrote:
Dear forum members,
Yesterday, I tried to simulating the behavior of a LCLR circuit
using PSPice. I connected a LCLR circuit to an AC source (sine wave
generator). The analysis type was 'AC sweep'.
Using PSpice, I plotted various graphs with Frequency on the x-axis
and the following three parameters in Y-axis:
1. Current through Parallel Inductor (inductor in tank circuit)
2. Current through Parallel Capacitor (capacitor in tank circuit)
3. Current through Series inductor.
My understanding is that at resonance:
1. The current through the tank circuit's L and C will be same.
2. The tank circuit's (either through L or C) will be IN PHASE with
the input sine wave source.