[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: EPCOS MKP 150nF/1600Vdc Caps for MMC ?

To: tesla@xxxxxxxxxx
Subject: Re: EPCOS MKP 150nF/1600Vdc Caps for MMC ?
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Mon, 25 Sep 2006 07:06:13 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Mon, 25 Sep 2006 07:14:01 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <D0mkBIW8JPJ.A.6ID.ZY9FFB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: tesla <tesla@xxxxxxxxxxxxxxx>


----- Original Message -----
From: <mailto:tesla@xxxxxxxxxxxxxxx>tesla
To: <mailto:tesla@xxxxxxxxxx>Tesla list
Sent: Wednesday, September 20, 2006 7:33 PM
Subject: EPCOS MKP 150nF/1600Vdc Caps for MMC ?

Team
I have about 1800 of the following from a kiwi auction site
Made by EPCOS
150nF/1600vdc 500vacrms  Metallised polypropylene film MKP caps series B32654

They have
dv/dt of 1kv/us
are designed for pulse work
have a Ko value 4000000v^2/us for max slew
27.5mm lead spacing
Size (in mm) 18W x 27.5H x 31.5L
Blue Coloured

At about 6 cents each I've scored well if they are OK for MMC's. Anyexperience people have with these in MMC's very welcome. From Specs Ibelieve they will be OK.

Thanks
Ted L in NZ

Prev by Date: RE: Leader Strike Photo
Next by Date: Movie Special Effects
Previous by thread: EPCOS MKP 150nF/1600Vdc Caps for MMC ?
Next by thread: Re: EPCOS MKP 150nF/1600Vdc Caps for MMC ?
Index(es):
- Date
- Thread