RE: toroid buk buy

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Terry Oxandale" <Toxandale@xxxxxxx>

Thank you for organizing this, but I will not participate in the 34 X
8.5 purchase. Thanks again,

Terry

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Monday, September 18, 2006 11:26 PM
To: tesla@xxxxxxxxxx
Subject: Re: toroid buk buy

Original poster: "resonance" <resonance@xxxxxxxxxxxx>



2 more.

Dr. Resonance
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Monday, September 18, 2006 10:35 PM
Subject: RE: toroid buk buy


>Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>
>
>DC,
>
>I am interested in the big top load too. $995 is out of range for me
though.
>How many need to be interested to drop the pricing?
>
>Best Regards,
>
>Jim Mora
>
>I'm still going to try to make a 54"x12 + with a smooth coating. Duct's
on
>its way...
>
>
>
>-----Original Message-----
>From: Tesla list [mailto:tesla@xxxxxxxxxx]
>Sent: Monday, September 18, 2006 8:00 PM
>To: tesla@xxxxxxxxxx
>Subject: toroid buk buy
>
>Original poster: "D.C. Cox" <resonance@xxxxxxxxxxxx>
>
>
>An update on our proposed bulk buy on toroids:
>
>It appears the 20 x 5 inch size and 34 x 8.5 inch size will be out as
>we had only one respondent for this size.
>
>With 4 respondents for the 24 x 6 inch size it works out to approx
>$410/pc. 3 4 x 8.5 inch size approx $705.
>
>Gerry S. and Terry Blake were the only two requesting the 48 x 12
>inch size and this came out to $995/pc.
>
>Everyone please drop me an email off-list to confirm you are all
>still in and I will place the order later this week.  If people drop
>out this order will probably fall apart.  Advise off-list on the 24 x
>6 inch size, 34 x 8.5 inch size, and  48 x 12 inch size.
>
>If anyone else wants in on these three sizes please contact me
off-list.
>
>
>Dr. Resonance
>
>