Re: Data on IGBT <Followup>

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Sparktron01@xxxxxxxxxxx 

Mike

I followed up on this lead to Toshiba website.  Apprarently, entire 
Power Electronics lines (discretes, IC's) of Toshiba have been 
acquired by Mitsubishi.  The Mitsubishi representatives here in US is 
Powerex (sans.  ex-Westinghouse Power Electronics Group).

www.pwrx.com

Unfortunately, no more info at Toshiba, Mitsubishi, or Powerex sites.  Tried
part numbers at all sites and got zilch, nada, zero.  Sorry.

Regards
Dave Sharpe, TCBOR/HEAS
Chesterfield, VA USA

 -------------- Original message ----------------------
From: "Tesla list" <tesla@xxxxxxxxxx>
> Original poster: "amdx" <amdx@xxxxxxxxxxx>
>
> Thanks Dave,
> I had been to this site but I didn't check the MSG180L43, so I thank
> you for that.
> I have spent about 4 hrs on the net searching for a data sheet, I
> wonder if it is available.
> Regarding spares, I got six of the MG200s and two MG300 for about
> 1-1/2 hrs work.
> The heat sink was enormous about 20"x20"x 6", the 6" height had
> extruded holes of
> about 3/16"x1/8" with .050" walls. The sink had three 6" fans to cool
> it. I pulled them
> from a huge UPS, it stood 4 ft. high by 3ft. by 3ft.
>   Any help finding the data sheets is appreciated.
>                                                        Mike
>
> >Original poster: Sparktron01@xxxxxxxxxxx
> >Hi Mike
> >---------------------------
> > >
> > > Hi Guys,
> > >    I came across some IGBT's
> > > MG200J2YS1
> >.
> > > MG300J1US1
> >.
> > > and
> > > MSG180L43
> >.-
> >No data sheets (sorry), but apparently MSG180L43 is a thrysitor (SCR)
> >not an IGBT.  First device (MG200J2YS1) looks like it may be suitable for
> >a large DRSSTC; hope you have spares, at ~$350 ea. US replacement cost...
> >
> >Regards
> >Dave Sharpe, TCBOR/HEAS
> >Chesterfield, VA.