Re: Data on IGBT

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "amdx" <amdx@xxxxxxxxxxx>

Thanks Dave,
I had been to this site but I didn't check the MSG180L43, so I thank 
you for that.
I have spent about 4 hrs on the net searching for a data sheet, I 
wonder if it is available.
Regarding spares, I got six of the MG200s and two MG300 for about 
1-1/2 hrs work.
The heat sink was enormous about 20"x20"x 6", the 6" height had 
extruded holes of
about 3/16"x1/8" with .050" walls. The sink had three 6" fans to cool 
it. I pulled them
from a huge UPS, it stood 4 ft. high by 3ft. by 3ft.
 Any help finding the data sheets is appreciated.
                                                      Mike

> Original poster: Sparktron01@xxxxxxxxxxx
> Hi Mike
> ---------------------------
> >
> > Hi Guys,
> >    I came across some IGBT's
> > MG200J2YS1
> -----------------------------------------------------
> URL: 
> http://www.galco.com/scripts/cgiip.exe/WA/WCat/itemdtl.r?pnum=MG200J2YS1-TOSJ&mfgr=TOSHIBA
> ------------------------------------------------------
> and
> > MG300J1US1
> ------------------------------------------------------
> URL:
> http://www.galco.com/scripts/cgiip.exe/WService=Galco-Web/WA/WCat/Catalog.htm?listtype=Catalog&search-part=PR00165P12-TOSH
> ------------------------------------------------------
> > and
> > MSG180L43
> ------------------------------------------------------
> URL: 
> http://www.galco.com/scripts/cgiip.exe/WService=Galco-Web/WA/WCat/Catalog.htm?listtype=Catalog&search-part=PR00205N11-TOSH
> ------------------------------------------------------
> No data sheets (sorry), but apparently MSG180L43 is a thrysitor (SCR)
> not an IGBT.  First device (MG200J2YS1) looks like it may be suitable for
> a large DRSSTC; hope you have spares, at ~$350 ea. US replacement cost...
>
> Regards
> Dave Sharpe, TCBOR/HEAS
> Chesterfield, VA.
>
> >
> > I was hoping be able to use them for my coil
> > but I can't locate any data sheets.
> >    I would appreciate any help locating the info.
> >                           Thanks,
> >                              Mike
> >
> >