Re: dual MOT Tesla coil design is complete (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>

At 10:48 PM 10/30/2006, you wrote:
> Hi DC,
>
> From what you say below, it sounds like you have the design but 
> have not built it yet??  If this is true, where did the 7.5 foot 
> arcs come from??
>
> Gerry R.

My SISG does about 28 inch arcs at 4800 SISG firing volts with a 
165nF primary cap.  It would do about 42 inches if I let it loose 
with one MOT...  If DC can get 4800 Watts out of two MOTs, then the 
spark length directly doubles to 84 inches or 7 feet.  But he is 
using a bit larger primary cap too...  So 7.54 feet is about 
right.  I am a little concerned about getting 4800 Watts out of just 
two MOTs.  But DC might know tricks I have never dreamed of ;-))

I have not thought much about the dual MOT SISG system...  But others 
are now thinking far faster than me on SISG things ;-)))))

Cheers,

        Terry