[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 10kva pole pig needed with 29kv primary



Original poster: "David Rieben" <drieben@xxxxxxxxxxxxxxx>

Hi Jim,

Yes, you could do exactly that ;^) Or, if you have at least
one of the pig trannies with 2 HV bushings, or "horns", you
could "float" one at 14,400 volts and "piggy-back" it on the
other one's output for additive voltage. Of course, you'd
at least want the pig that's floating at 14.4 kV to be a 2 HV
bushinged unit, as the outer tank of a pig floating at 14.4 kV,
relative to ground, would be an electrocution waiting to hap-
pen ;^0 The pigs' BIL rating should allow for piggy-backing
of the HV output of one pig on another, though. I think Scot
"Bunnykiller" Dingman uses 2 seriesed 14.4 kV pigs for up
to ~30 kV input for his big coil's primary circuit. He discusses
this on his website. http://bellsouthpwp.net/B/u/BunnyKiller/bigpig.html

David Rieben

----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, October 18, 2006 7:37 PM
Subject: FW: 10kva pole pig needed with 29kv primary


> Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>
>
> With single horn tranies, would one simply connect the cases together and
rf
> or mains ground them? Just curious...
> Jim Mora
>
> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx]
> Sent: Tuesday, October 17, 2006 10:40 PM
> To: tesla@xxxxxxxxxx
> Subject: RE: 10kva pole pig needed with 29kv primary
>
> Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>
>
> Dr R,
>
> Could you take two dual horn 14400 phased correctly and connect two of the
> horns to the cases to get 28800 like a neon and have 20kva? I have seen
> posts of people grounding one of the horns...
>
> Jim Mora
>
> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx]
> Sent: Tuesday, October 17, 2006 8:30 PM
> To: tesla@xxxxxxxxxx
> Subject: Re: 10kva pole pig needed with 29kv primary
>
> Original poster: "resonance" <resonance@xxxxxxxxxxxx>
>
>
>
> I have 14.4 kV 10 kVa pole xmfrs for sale.  Contact me off-list if
> interested.  I get a 60% discount with Watkins-LTL freight carriers.
>
> Dr. Resonance
>
>
>
>   >anyone near pennsylvania with a 10kva pole pig for sale,
>   >preference for 29kv primary, however, will take smaller. should
>   >have dual high voltage leads besides one.
>
>